Clamping and flanged branch clamps

کلمپ-تعمیراتی-بوشنی-نافی-دار


Stainless steel SPA umbilical and flanged branch clamps for branching or

Changing the diameter of pipes is used in water, gas and petrochemical industries.

Branches can be used to branch from the following pipes:

1- Ductile cast iron pipes 5- PVC pipes    2- Steel pipes 6- Polyethylene PE pipes

3- Steel pipes 7- GRP pipes    4- Class D, C, B asbestos pipes

Product Specifications:

1- All metal parts are made of stainless steel AISI 304 or AISI 316.

2- The rubber band used is made of EPDM, SBR, NBR.

3- Welding of all metal parts is done by argon welding and under argon shielding gas.

4- All screws are produced by roll forming method and are covered by Teflon.

5- All nuts and washers are made of stainless steel AISI 304 or AISI 316.

6- All flanges are designed for working pressure PN 10/16.

7- Drilling holes of all flanges are according to DIN2501, DIN2576 standard.

8- All flanges, body and accessories of branch branches are made of stainless steel AISI304 or AISI316.

Corded branch clamps (bushings)

The branching of the sizes “1/2 1,” 3, “4 will be in the form of two jaws.

Productive sizes of splitter body

Corded splitters (SP10A) can be designed and manufactured for pipes from 44mm to 364mm outside diameter in lengths of 200, 250, 300, 400, 500 and 600 mm.

Corded splitters (SP20A) can be produced for pipes with an outer diameter of 109 mm to 645 mm and in lengths of 200, 250, 300, 400, 500, 600, 750 and 1000 mm.

Working pressure of branch clamps (for water direction)

For pipe diameter ND40 to ND150, the tolerable pressure is 16 bar and for pipe diameter ND175 to ND300, the bearing pressure is 10 bar.

Flanged branch clamps

Production sizes:

Flange branch clamps (SP10T) are designed and produced for pipes from 187mm to 346mm in diameter in lengths of 200,250,300,400,500,600,750 and 1000 mm.

Flange branch clamps (SP20T) are designed and manufactured for pipes from 109mm to 1200mm in diameter in lengths of 300,400, 500, 600, 800, 1000 and 1200 mm.

Flange design:

All flanges are made of 304 or 316 steel.

The drilling holes of the flanges used in the branch clamps are according to DIN2576, DIN2501 standard.

All flanges are designed and manufactured according to the standard for PN10 and PN16

Working pressure of branch clamps (for water direction)

For ND80 to ND500 pipe diameters, the bearing pressure is 16 bar

For ND600 pipe diameter, tolerable pressure 10 times

The minimum body length of flanged branch brackets is determined from the table below.

We're at your service

Contact us, you will be answered as soon as possible.
E-mail:Sayyalpaco@yahoo.com
phone:   32224019(024)    32224021(024)      32224022(024)    32224072(024)
Fax: 32224021(024)    32224072(024)
Whats app and telegram:  09190596595

Where are we?

Zanjan. Aliabad Industrial Town. Sanat St. 2, corner of Toseeh 4